nuwavenow.com | 7
Assembling the Brio
After Use:
• NEVER use the Brio without the Base Tray or Air Circulation Riser.
• NEVER touch the inside of the Base Tray or Air Circulation Riser immediately
after cooking.
• NEVER use utensils to remove the Air Circulation Riser, they may scratch the
coating.
• When removing food from the Base Tray use a silicone utensil or partially tip
the Base Tray and carefully shake the food onto the serving dish.
ASSEMBLY GUIDE
1. Using the handle, pull the Base Tray straight out from the Power Base and
remove the Air Circulation Riser by poking a hole in the center of the paper
and lifting.
2. Remove any paper or plastic inside the Power Base or Base Tray.
3. Remove the paper wrapped around the Air Circulation Riser, then slide it back
into the Base Tray, ensuring it fits snugly inside.
Removing the Base Tray & Air Circulation Riser
To Next Page
Loading...
