NuWave MOSAIC - Functions

nuwavenow.com | 11
On/Off Function:
1. Press ON/OFF once to turn on. “0” will
be displayed.
2. Press ON/OFF again to turn the unit off.
Watts Function:
3. The default wattage is set to 1500W.
Press WATTS repeatedly to switch to
600W, 900W, and back to 1500W.
• When you turn the unit off and on again,
the previously selected wattage will
remain set until you change it.
Farenheit to Celcius Function:
1. Press STAGE and WATTS
simultaneously until you see “F°” or “C°”
ashing.
2. Press STAGE to switch from “F°” to “C°”
or “C°” to “F°”.
3. Press ON/OFF to complete the
selection.
Pause/Clear Function:
1. Press “pause/clear” once to pause the
unit.
• The temperature selected will be
displayed and “F” will be ashing.
• If have selected “TIME” and you press
PAUSE, “:” will not ash.
• To resume cooking, press START.
2. Press PAUSE/CLEAR again to clear any
program out.
Quick Start:
1. After you turn the unit on, press START
on the dial. “375°F” and “TEMP” will be
displayed and the countdown will begin.
• The Wok is defaulted to 375°F for 20
minutes.
Temperature Function:
Simply turn the dial to decrease or increase
temperature.
• The dial located on the left.
• Temperature range 100-575°F in
5-degree increments.
FUNCTIONS
Time Function:
Simply turn the dial to decrease or increase
time.
• The dial located on the right.
• Time range is from 1 minute to 9 hours
and 59 minutes (Time is in Hours and
Minutes).
Stage Function:
1. Press STAGE. “STAGE” will be ashing
and “1”, “TIME”, and “00:00” will be
displayed.
2. Set time and adjust temperature, if
needed.
3. Press STAGE again. “STAGE” will be
ashing and “2”, and “TIME”, and “00:00”
will be displayed.
4. Set time and adjust temperature, if
needed.
5. Repeat steps, if necessary.
• You can create up to 10 stages. Stage
10 will display as “0”.
6. Press START.
Preheat Function:
1. Press PREHEAT. “PREHEAT” and
“375°F” will be displayed.
2. Adjust time and adjust temperature, if
needed.
• Preheat program has a default of 375°F
for 20 minutes.
3. Press START. Selected temperature
and “F” will be ashing.
4. Once the temperature you selected has
been reached, the Wok will beep twice
and “ready” will appear. A 10 second
countdown begins then will beep once
and the cooking begins.
• If you press PAUSE when the unit
is preheating, “5” will be ashing,
indicating the Wok will hold the program
for 5 minutes until you press START.
To begin the cooking process press
START. If no action is taken, the Wok
will turn off and display “0”.