Need help?Do you have a question about the nux duotime NDD-6 and is the answer not in the manual?
General| Type | Delay |
|---|---|
| Technology | Digital |
| Number of Effects | 2 |
| USB | No |
| Current Draw | 100 mA |
| Bypass | True Bypass |
| A/D Converter | 24-bit |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Feedback | Up to 100% |
| Level Control | Yes |
| Footswitch | 2 (A/B) |
| Inputs | 1 x 1/4\" |
| Outputs | 2 x 1/4\" |
| Power Supply | 9V DC |
| Frequency Response | 20 Hz - 20 kHz |
| Delay Time | Up to 2000ms |
Crucial warnings and precautions to read before connecting the appliance to prevent hazards.
Details the Analog Delay mode, its parameters, and characteristic sound.
Explains the Tape Echo mode, its saturation parameter, and vintage sound.
Describes the Digi Delay mode, its compression and filter, and musical sound.
Covers the Mod. Delay mode, its experimental nature, and romantic tone.
Details the Verb Delay mode, its 3D sound, Shimmer, and atmosphere.
Controls the delay mix level and phrase loop volume.
Adjusts specific parameters like Modulation Depth, Saturation, Hardness, etc.
A rotary switch to select one of the five delay modes.
Shows current delay type and delay time in MS/BPM.
Controls delay1's delay time and sub-division when Tap Tempo is active.
Controls the number of repeats for delay1.
Controls delay2's delay time and sub-division when Tap Tempo is active.
Controls the number of repeats for delay2.
Engages the delay effect or controls Loop Rec/Play/Dub.
Adjusts delay speed and sub-division by tapping; holds to switch MS/BPM.
Describes how to enter and operate the phrase loop function.
Input jack for mono signal, affecting DELAY 1 and DELAY 2.
Input jack for mono/stereo signal, affecting DELAY 2 and DELAY 1.
Output jack related to DELAY 1.
Output jack related to DELAY 2.
Used for firmware updates.
Power input connector, requires 9V DC.
Illustrates stereo output with mono or stereo input configurations.
Shows mono output options, selecting either Delay 1 or Delay 2.
Demonstrates a serial connection from Delay 1 to Delay 2.
To Next Page
