nux MG-20 User Manual

Skip to content
Manuals+
User Manuals Simplified.
NUX MG-20 Guitar Modeling Processor User Manual
Home » NUX » NUX MG-20 Guitar Modeling Processor User Manual
NUX MG-20 Guitar Modeling Processor
Thank you for purchasing the NUX MG-20 Guitar Modeling Processor!
MG-20 is one of the easiest guitar modeling processors. If you are familiar with traditional guitar rig, you may have known how to set tones in MG-20. It is also very convenient for live
performance! From the panel, you can always see what effects are in the chain. To turn on and off effect modules or to assign functions to the CTRL switch and Expression pedal are quick
and easy! We won’t let you lose a beat!
In MG-20, NUX has brought the original TSAC Technology to a new level! It is equipped with 32bit float point DSP. The new algorithm nails every detail of the classic amps and effects.
More than 60 effect models, plus various output modes, no matter what style you play, you’ll have great tone on tap!

nux MG-20 Specifications

General

Type	Multi-effects Processor
Display	LCD
Amp Models	20
Looper	Yes
Expression Pedal	Yes
Power Supply	9V DC adapter (included)
Sampling Rate	44.1 kHz
Bit Depth	24-bit
A/D/A Converter	24-bit
Sampling Frequency	44.1 kHz
Frequency Response	20 Hz - 20 kHz
Input Impedance	1 MΩ
Output Impedance	1 kΩ
Dynamic Range	100 dB
Connectivity	USB, Aux In, Headphone Out
Input	1/4" (guitar)
Output	1/4" (6.35 mm) jack
Power	9V DC