nvent JBS-100-A - Page 8

Weather seal
–WS
©2001 www.nVent.com
RAYCHEM
17
18
• Install lid.
• Apply insulation and cladding.
• Weather-seal the stand entry.
• Leave these instructions with the
end user for future reference.
nVent recommends the use
of a conduit drain to prevent
water condensation build-up.
Make sure
conductors are
not exposed.
Conduit
drain
3/4 in locknut
Water tight
conduit seal
1/2 in
(13 mm)
Power and ground wires
nVent.com | 8Raychem-IM-H56046-JBS100A100A6- ML-1805
• Install conduit and fittings as shown. To
minimize loosening due to pipe vibration, use
flexible conduit.
• Pull in power and ground wires, strip off 1/2 in
(13 mm) of insulation and terminate.