4 | nVent.com
7
User settings (
[ ]
R
C
EcoHome
EcoOffice
Standby
•
0h
•
3
• •
6
• •
9
• •
12
• •
15
• •
18
• •
21
• •
24
•
0h
•
3
• •
6
• •
9
• •
12
• •
15
• •
18
• •
21
• •
24
•
0h
•
3
• •
6
• •
9
• •
12
• •
15
• •
18
• •
21
• •
24
) 20
7.1 The standard User Menus 21
7.1.1 User Menu 1: Sensor Setting 21
7.1.2 User Menu 2: Service read out 21
7.1.3 User Menu 3: Calibration of the
floor temperature (offset value) 22
7.1.4 User Menu 4: Calibration of the
room temperature (set value) 23
7.1.5 User Menu 5: Display back-light
“on” duration 23
7.1.6 User Menu 6: Minimum temperature
set point for the floor sensor 24
7.1.7 User Menu 7: Maximum temperature
set point for the floor sensor 24
7.1.8 User Menu 8: Minimum temperature
set point for the room sensor 24
7.1.9 User Menu 9: Maximum temperature
set point for the room sensor 25
7.2 The Installers or Advanced User
Menus 25
7.2.1 User Menu A: Adaptive function
(ITCS – Intelligent Temperature
Control System) 25
7.2.2 User Menu B: “First warming”
function 25
7.2.3 User Menu C: Running time 26
7.2.4 User Menu D: Adjustable switching
hysteresis 26
7.2.5 User Menu E: Delayed Start-Up 26
7.2.6 User Menu F: Frost protection
for OFF Programme 27
7.2.7 User Menu G: Proportional
regulation 27
7.2.8 User Menu H: Set back
temperature offset 27