M.2 NVMe Boot Drive Replacement
DGX-2 System DU-09224-001 _v09|18
7. Insert the new M.2 module and secure it with the screw to the riser card.
8. Install the assembled module on the motherboard by inserting the the riser card in its slot.
9. Install the motherboard tray lid and then install the motherboard tray.
Refer to the instructions in the section Installing the Motherboard Tray.
10.Connect all the cables to the motherboard tray.
Rebuild the RAID 1 array according to the instruction in the section Rebuilding the Boot Drive
RAID 1 Volume.
To Next Page
Loading...
Need help?
General
