Nvidia SN2201

87
1.
2.
3.
4.
5.
6.
7.
Disassembly and Disposal
Disassembly Procedure
To disassemble the system from the rack:
Unplug and remove all connectors.
Unplug all power cords.
Remove the ground wire.
Unscrew the center bolts from the side of the system with the bracket.
Slide the system from the rack.
Remove the rail slides from the rack.
Remove the caged nuts.
Disposal
According to the WEEE Directive 2002/96/EC, all waste electrical and electronicequipment (EEE)
should be collected separately and not disposed of with regularhousehold waste.Dispose of this
product and all of its parts in a responsible and environmentallyfriendly way.
Follow the instructions found at http://www.mellanox.com/page/dismantling_procedures for
proper disassembly and disposal of the switch, according to the WEEE directive.
Support the weight of the system when you remove the screws so that the system
does not fall.
