Nvidia Spectrum-3 SN4000 Series

15
•
•
•
•
•
•
Mounting Options
By default, the systems are sold with fixed rail-kits. Telescopic Rail-kits are available for some
systems, and should be purchased separately. For installation instructions, refer to the relevant links
in the following table:
System Model Fixed Rail-kit (Default)
Telescopic Rail-kit
SN4600/SN4600C SN4600/SN4600C Fixed Rail Kit SN4600/SN4600C Telescopic Rail Kit
SN4410
SN4700
SN4410/SN4700 Fixed Rail Kit N/A
SN4600/SN4600C Fixed Rail Kit
Kit OPN Legacy OPN Rack Size and Rack Depth Range
930-9BRKT-00JF-000 MTEF-KIT-C 430-800 mm
The following parts are included in the fixed rail kit (see figure below):
2x Rack mount rails (A)
2x Rack mount blades (B)
2x Rack mount ears (C)
8x M6 Standard cage nuts (D)
8x M6 Standard pan-head Phillips screws (E)
4x Flat Head Phillips 100 DEG 6-32X1/4" ST.ST PATCH 360 (F)
Rack Rail Kit Parts
Ax2 Bx2 Cx2
If anything is damaged or missing, contact your sales representative atNetworking-
support@nvidia.com.

This document is preliminary and subject to change.
