NXP Semiconductors PN5180 - Fig 18. Typical PN5180 Analog Circuit; Fig 19. Antenna Circuit

NXP Semiconductors
AN11740
PN5180 Antenna design
AN11740
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.1 — 19 June 2018
345311
22 of 62
(1) Names to be adapted!
(2) Tbd: “to be defined”, need to be defined using this document.
(3) CXx, CAntx, C0x, C1x and C2x must be NP0.
Fig 18. Typical PN5180 analog circuit
(1) Names to be adapted!
(2) Tbd: “to be defined”, need to be defined using this document.
(3) CXx, CAntx, C0x, C1x and C2x must be NP0.
Fig 19. Antenna circuit
The antenna typically is a part of the PCB design (see section 3.2). All capacitors are
typical ceramic capacitors (e.g. X7R), except the capacitors used in the matching