All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.1 — 19 June 2018
345311
4.2.1.8 Impedance correction and assembly
The tuning of the impedance is now corrected with the values of C1 and C2, as shown in
Fig 32.
a. Final simulation circuit
b. Final Simulation result
Fig 32. Final tuning simulation
These values are assembled, and the impedance is measured. The result is shown in Fig
33.
To Next Page
Loading...