All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.1 — 19 June 2018
345311
5. Annex
This annex describes some basics about impedance measurement and the related
measurement tools.
5.1 Vector Network Analyzer
The impedance measurement must be done with a vector network analyzer, e.g. as
shown in Fig 49.
a. Rohde & Schwarz ZVL (refer to [11])
b. MiniVNA Pro (refer to [12])
Fig 49. Examples of Vector Network Analyzers
For the miniVNA Pro the recommendation is to use the VNA/J SW tool (refer to [13]), as
shown in Fig 50.
To Next Page
Loading...