NXP Semiconductors
S32K344
White Board
Figure 25. User LEDs schematic
8.7.3 ADC rotary potentiometers
The two ADC POTs are linked to MCU PINs PTB13 and PTB14. See following figure for
the schematic.
Figure 26. User ADC inputs schematic
8.7.4 Touch sense pads
There are two touch sense buttons and one touch sense slider on the White Board. See
following figure for the schematic.
UM11919 All information provided in this document is subject to legal disclaimers. © 2023 NXP B.V. All rights reserved.
User manual Rev. 1.0 — 11 April 2023
COMPANY PUBLIC 24 / 32
To Next Page
Loading...
