NXP Semiconductors
S32K344
White Board
Figure 31. Audio circuit on the White Board
8.11 Others
The QSPI Flash (S25FL128L, 128Mbit) on the White Board can be used to store the
firmware for S32K344 and other controllers connected to the vehicle network.
The FRAM (MB85RC256VPF, 256Mbit) is used to store some NVM data in case quick
write is needed during power down.
The MMA8452Q is a smart, low-power, three-axis, capacitive, micromachined
accelerometer with 12 bits of resolution. The device can be configured to generate
inertial wakeup interrupt signals from any combination of the configurable embedded
functions allowing the MMA8452Q to monitor events while staying in low power mode.
Figure 32. QSPI Flash, FRAM and sensor on the White Board
UM11919 All information provided in this document is subject to legal disclaimers. © 2023 NXP B.V. All rights reserved.
User manual Rev. 1.0 — 11 April 2023
COMPANY PUBLIC 27 / 32
To Next Page
Loading...
