Nylex 719042 - Troubleshooting and Specifications; Troubleshooting Common Issues; Main Unit Specifications; Indoor Barometer and Temperature Specs

Strange or no measurement of Thermo /
Hygro Sensor
Strange or no measurement of Wind Speed
and Direction
(Signal lost for 15 minutes)
(Signal lost for 1 hour)
Strange or no measurement of Rain Sensor
Problem / Symptom Solution
1. Check the radiation shield.
2. Check the sensor casing.
1. Check the drain hole in the rain collector.
2. Check the balance indicator.
1. Check wind cups (Anemometer).
2. Check the wind vane.
1. Relocate the main unit and sensor closer to each other.
2. Make sure the main unit is placed away from other
electronic
appliances that may interfere with the wireless communication
(TVs, computers, microwaves).
3. If problem continues, reset both main unit and sensor.
and
and
TROUBLESHOOTING
17 18
MAIN UNIT
Dimensions (W x H x D) 120 x 190 x 22 mm
Weight 370g with batteries
Battery 3 x AA size 1.5V batteries (Alkaline recommended)
Support channels Wireless 5-in-1 sensor (Wind speed, Wind direction, Rain gauge, thermo-hygro)
INDOOR BAROMETER
Barometer unit hPa, inHg and mmHg
Measuring range 850 to 1050 hPa
Accuracy +/- 5 hPa / +/- 0.15inHg / +/- 3.8 mmHg (970~1030 hPa) typical @ 25°C (77°F)
Resolution 1hPa, 0.01inHg, 0.1mmHg
Weather forecast Sunny / Clear, slightly Cloudy, Cloudy, Rainy, Rainy / Stormy and Snowy
Display modes Current, Max, Min, Historical data for last 24hrs
Memory modes
INDOOR TEMPERATURE
Temp. unit °C or °F
Displayed range -40°C to 70°C (-40°F to 158°F) (< -40°C: LO; > 70°C: HI)
-10°C to 50°C (14°F to 122°F)Operating range
Accuracy +/- 1°C or 2°F typical @ 25°C (77°F)
Resolution 0.1°C or 0.1°F
Display modes Current, Min and Max, Historical data for past 24 hours
Memory modes Max & Min from last memory reset (with time stamp)
Max & Min from last memory reset (with time stamp)
Alarm Hi / Lo Temperature Alert
SPECIFICATIONS
Displayed range
20% to 90% RH (< 20%: LO; > 90%: HI) (Temperature between 0°C to 60°C)
Operating range 20% to 90%RH
Resolution 1%
Accuracy +/-5% typical @ 25°C (77°F)
Display modes
Current, Min and Max, Historical data for past 24 hours
Memory modes Max & Min from last memory reset (with time stamp)
Alarm Hi / Lo Humidity Alert
INDOOR HUMIDITY
Clock display
HH:MM:SS / Weekday
Hour format
12hr AM/PM or 24hr
Calendar DD/MM/YR or MM/DD/YR
Weekday in 5 languages
Hour offset -23 to +23 hours
EN, FR, DE, ES, IT
CLOCK