NZXT TEMPEST - Power Supply Installation

NZXT. 14
Push the tabs to remove the cage
Installing the power supply
The NZXT Tempest power supply bracket is located at the rear
bottom of the chassis. Please follow the directions below for
installation.
1. Align the power supply with the mounting holes on the
bracket.
2. Secure the PSU using screws provided.
3. The NZXT Tempest allows the user flexibility in installing the
PSU, by removing the power supply bracket and turning it
the user can mount the power supply with the fan facing the
opposite direction.
PSU at the bottom of the chassis