NZXT TEMPEST - External 5.25 Drive Bay Installation (Bays 4-6)

NZXT. 9
6. Turn the screw less bracket to lock the drive.
Turn and lock the device in place. User may choose to screw the
device on also.
External 5.25” Drive Bay Installation [Bays 4-6]
Please follow the directions below to install the 5.25” in bays 4 to 6 of
the Tempest:
1. Remove the front panel of the chassis by pulling at the
bottom of the front panel.
2. Remove the screws securing the bay.