Oakton CON 6 - Page 27

Instruction Manual CON 6/TDS 6
23
S
µ
mSmS
Auto-ranging Manual ranging: 0 - 20.00 uS/cm Manual ran
g
in
g
: 0 - 200.0 uS/cm
Manual ranging: 0 - 2000 uS/cmManual ranging: 0 - 20.00 mS/cmManual ranging: 0 - 200.0 mS/cm
S
µ
S
µ
S
µ
NOTE:
If the value of the solution you are measuring is higher than the
range selected [Or] will appear on the primary display. Press
RANGE until the correct range is selected.
The meter resets to the Auto-ranging function once it is turned
off. You will have reset the manual ranging function each time
you turn the meter off.