Oase BioSmart 18000 - User Manual

Alec JohnsonJul 27, 2025

Why is the water in my Oase Water Filtration Systems staying cloudy?

B
Bethany MartinJul 27, 2025
If the water in your Oase Water Filtration System remains cloudy, several factors could be responsible. If the unit is new, allow several weeks for the biological cleaning effect to fully establish. Check and readjust the pump capacity to ensure it's adequate for your pond size. Clear the pond of excessive algae and leaves and consider a partial water change if the water is extremely soiled. Ensure that the fish and animal population is within the recommended guidelines, roughly 60 cm of fish length per 1 m3 of pond water. Lastly, inspect the foam filters and clean them if they appear soiled.

Summary

Explains symbols used throughout the manual for safety and information.

Details the specific applications and limitations for the BioSmart unit.

Provides crucial safety guidelines for operating the BioSmart device.

Step-by-step guide for physically setting up the BioSmart unit.

Procedures for starting the BioSmart filter system for the first time.

Instructions for cleaning filter foams and water level indicators.

Guidelines for storing the BioSmart unit during winter or when not in use.

Identifies common issues and their solutions for the BioSmart unit.

Information regarding components that are subject to wear and tear.

Instructions on how to properly dispose of the BioSmart unit.

Details key technical data for the BioSmart 18.000/36.000 models.

Provides specific safety advice translated into multiple languages.

Oase BioSmart 18000 Specifications

General