Oase FiltoClear 5000 Manual

18
Connection components for installation
 B
1
Hose connector, transparent
•
Use: Water outlet, dirt water outlet
2
Hose connector, black
• Use: Water inlet
3
Hose connector, black with G2 outer thread
• Use: Open end of the dirt water hose, the cover cap is screwed onto the outer thread
4
Union nuts G2, for installing the hose connectors
5
C
over cap G2, for closing the dirt water outlet
6
Flat seal for black hose connector and cover cap
7
Flow lug for transparent hose connector
8
Hose clip
Recommended filter pump
FiltoClear
5000
13000
19000
31000
AquaMax Eco Premium
4000
8000
12000
16000
Installation and connection
Installing the unit
 C
To be taken into consideration for planning:
• For operation at a swimming pond: Install the unit at a distance of at least 2 m from the water.
• For operation at a pond: You can set up the unit directly at the edge of the pond.
• Protect the pressure filter from direct sunlight.
• Route the return hose into the pond so that the water returns to the pond e.g. through a wa-
ter course. This enriches the water with additional oxygen.
• Ensure that the inlet into the pond is max. 2 m above the filter cover.

Oase FiltoClear 5000 Specifications

General

Brand	Oase
Model	FiltoClear 5000
Category	Water Filtration Systems
Language	English