44
Cleaning the unit and washing or replacing the foam filters
Wear of the foam filters is caused by mechanical stress and normal ageing.
Insert new foam filters at the start of the season.
Disassembling the foam filter package
Prerequisite:
The filter cover has been removed. (→ Removing the filter cover)
Place the filter cover upside down on a soft clean surface so that the foam filter package is on
top.
Undo the two screws, remove the closing disc and remove the first foam filter.
For every additional foam filter, undo the two spacers and remove the spacer disc and the
foam filter.
To Next Page
Loading...
