Oasis MAXXFILL FLEX User Manual

IN
OUT
3. Locate the coil of tubing on the inside of the
cabinet on the right side. Remove the elbow
ttingandsetitaside.
4.Insertthewater-inlineintothelterinletof
thelterheadandtheninsertthewater-out
lineintothelteroutlet.Ensurebothlinesare
securelytted.
Note: Refer to your lter or lter
instructions to nd the inlet and outlet for
your chosen lter.
9
YourOASIScoolerhastheoptiontobettedwithvariousltrationoptions(notincluded).
1. Turn off the water supply and then dispense water into a cup to relieve pressure. Unplug the unit.
2.Inserttheltermountingbracket(notincluded)betweenthecondensercoilsfromtheoutsideandsetto 
thedesiredheight.Ensurethatthelterishighenoughtobepulledoutfromthelterheadandremoved.
Onceset,useappropriatescrewstoattachthelterheadtothebracket.
Note: The hardware to mount the lter head to the unit is not included.
5. Turn the water source back on and reconnect power.
ADDING FILTRATION (OPTIONAL)

Oasis MAXXFILL FLEX Specifications

General

Brand	Oasis
Model	MAXXFILL FLEX
Category	Water Dispenser
Language	English