Observa Telecom LTE CPE SQI4N4 User Manual

Figure3‐6
3.3 LANSetting
3.3.1 SettingLANHostParameters
By default,the IP address is 192.168.1.1 with asubnet mask of 255.255.255.0. You canchange
thehostIPaddresstoanotherindividualIPaddressthatiseasytoremember.MakesurethatIP
addressis uniqueonyournetwork.Ifyou changetheIPaddressof theCPE, youneedtoacc
ess
thewe
bmanagementpagewiththenewIPaddress.
TochangetheIPaddressoftheCPE,performthefollowingsteps:
1. ChooseNetworkSetting>LANSettings.
2. IntheLANHostSettingsarea,setIPaddressandsubnetmask.
3. IntheDHCPSettingarea,settheDHCPservertoEnable.
4. ClickSubmit.AsshowninFi
gure3‐7.

Observa Telecom LTE CPE SQI4N4 Specifications

General

Brand	Observa Telecom
Model	LTE CPE SQI4N4
Category	Network Router
Language	English