www.discovermymobility.com
- 15 -
29. Controller program
The controller program affects speed, acceleration, deceleration, and braking.
The drive mode settings are preset at the factory.
30. Operating Conditions
Your control system uses industrial-grade components throughout, ensuring
reliable operation in a wide range of conditions. However, you will improve the
reliability of the control system if you keep exposure to extreme conditions to a
minimum. Do not expose your control system or its components in damp
environments for prolonged periods. If the control system becomes
contaminated with food or drink clean it off as soon as possible after turning off
the power.
31. Cleaning
Clean the control system and the joystick with a cloth dampened with diluted
detergent. Be careful when cleaning the joystick and screen. Never use
abrasive or spirit-based cleaners.
32. Freewheel Mode – pushing the power chair
The Viking is equipped with a manual freewheel system enabling the
electromagnetic brakes to be disengaged and the power Recreational Vehicle
to be maneuvered manually. To disengage the built-in brakes simply pull the
two levers. The Recreational Vehicle controls will not function and the “status”
light on the joystick will flash when the chair is in free-wheel mode. This feature
has been intentionally incorporated to protect the user from unsafe situations.
Don’t forget to push the levers back in again firmly after you are done manually
positioning the chair.
33. Operating Recreational Vehicle & Controls
The R-net control system has two versions of Joystick Module – with and
without lighting control. Most of the controls are common to both. Each of the
controls is explained within this section.
To Next Page
Loading...