www.discovermymobility.com
- 28 -
43.2 Tire Assembly
Figure 3 Figure4
Follow these easy steps for a quick and safe repair for the solid tires:
1. Turn off the power to the controller.
2. Set the power chair up on the blocks.
3. Remove the drive wheel nut and washer from the axle. See figure3.
4. Pull the wheel off the axle.
5. Remove the screws from the rim assembly and separate the front and rear
rim, See firgure4.
6. Reassembly the rims and reinstall the screws.
7. Slide the wheel back onto the axle. Make sure that the key is in the axle
slot.
8. Reinstall the drive wheel nut and washer onto the axle and tighten.
9. Remove the power chair from the blocks.
To Next Page
Loading...
