www.discovermymobility.com
- 20 -
34.4 Charger Socket
This socket should only be used for charging or locking the Recreational
Vehicle. Do not connect any type of programming cable into this socket. Refer
to section13 for more details on charging. This socket should not be used as a
power supply for any other electrical device. Connection of other electrical
devices may damage the control system or affect the E.M.C. performance of
the Recreational Vehicle.
The control system’s warranty will be voided if any device other than the
battery charger supplied, with the Recreational Vehicle, or the lock key is
connected into this socket.
34.5 Screen Symbols
The Drive screen for the R-net has common components, which will always
appear, and components that will only appear under certain conditions. Below
is a view of a typical Drive screen in Profile 1.
34.6 Top Bar
Battery Indicator
This displays the charge available in the battery and can be used to alert the
user to the status of the battery.
Steady: This indicates that all is well.
Flashing Slowly: The control system is functioning correctly, but you should
charge the battery as soon as possible.
To Next Page
Loading...
