OBSIDIAN CONTROL SYSTEMS NETRON EN4 - DMX Ports

16
MENU: DMX PORTS
Select a port number to adjust its settings. Depending on the
Mode, certain options are not relevant and hidden from the
display or web interface.
SUB MENU
OPTIONS / VALUES
DESCRIPTION
Universe
1 – 256
Select the EtherDMX Universe
Mode
Disable
The port is disabled.
Input
The port receives DMX values and assigns them to the
selected Universe.
Output
The port sends out DMX Values on the selected
Universe
Send Value
0 – 255
Send a static DMX value
Protocol
Artnet, sACN, None
Select the EtherDMX protocol per port
FrameRate
10, 15, 20, 25, 30, 35, 40
Select the desired frame rate.
RDM
Disabled, Enabled
Disable / Enable RDM traffic for this port
Merge
OFF
The merger is disabled
HTP
The sources are merged by Highest Takes
Precedence
LTP
The sources are merged by Last Takes Precedence
Toggle
The complete source Universe is switched as soon as
a single value changes
Clone
None, Port 2, Port 3, Port 4
Replicates the identical DMX data from another port
Range
From: 1 – 512
default 1
To: 1 – 512
default 512
Offset Addr
Off, 2 - 511
Offset start address, incoming channel X value is sent
on this port as channel X+Offset, Channels are cut off
if they exceed 512