10
Note:
1) Instant Upload Mode: The data will be uploaded to
the device immediately after scan, out of range it
will not save the data, and there will be alarm beeps
out of range.
2) Automatic Storage Mode (default): If the scanner in
range, the data will be uploaded to your device
directly after scan; if the scanner out of range, will
hear alarm beeps, the data will be saved in the
memory chip. Press the scanner trigger to upload
the saved data after back to range.
3) Inventory Mode: The data will be saved in the
memory chip, you can upload data to your device by
scan the set code in the manual. (Refer to "Data
Upload Instruction in Inventory Mode")
Eg: Scan the“Upload all data”, the scanner will upload
all data saved in the memory chip.
Data Upload Instruction in Inventory Mode
Upload all data Upload new data
Display all data Display new data
No delay Delay 10ms
Transmission Speed
Delete all data
To Next Page
Loading...