Oce plotwave 365 - Restore the Factory Defaults of the Templates

Restore the factory defaults of the templates
Introduction
You can restore the factory defaults of all templates with Océ Express WebTools.
The custom templates are not changed.
Procedure
1.
Select the [Preferences] - [Scan] tab in Océ Express WebTools for the scan templates.
2.
Click on [Restore factory defaults] at the right hand side.
3.
The system displays the message [Restore all factory default templates?]
4.
Click [Ok] to restore the templates or [Cancel] to stop the restore.
Restore the factory defaults of the templates
100
Chapter 3 - Define your Workflow with Océ Express WebTools