- 8 -
4
Network Setup
The Internet Radio must have a high bandwidth internet
connection and a wireless (Wi-Fi) home network
connected to it to be fully functional.
To configure the Wi-Fi network connection turn on the
radio by pressing and holding [ ] button until the display
illuminates - this normally takes 3 - 5 seconds.
The first time the Radio is turned on after leaving the
factory a Configure Network wizard is automatically
started:
1) Highlight and Select Yes to connect to the Wi-Fi
network
2) The display will change and display a list of options –
Select Add AP (Scan)
3) The display will show a list of available networks –
Select your network
4) The display will ask for your passcode/password –
using the [ ▲ ] and [ ▼ ] buttons highlight the first
digit and press [ ► ] button to confirm and input the
next character. highlight the next digit and press [ ► ]
button to move forward. Repeat until the last digit is
highlighted. While the last digit is highlighted Select
by pressing and releasing the [ OK ] button. If the
wrong character be input, press [ ◄ ] button to delete
it.
5) If the connection is successful “Association
Complete” will be displayed briefly.
To Next Page
Loading...
