- 22 -
10. Configuration
Language
You can choose other languages as preferred. Scroll with the ▲▼ buttons on
remote or [NAVIGATE/ENTER] knob to the item with and press
[NAVIGATE/ENTER] or OK on remote. Scroll to highlight and press
[NAVIGATE/ENTER] or OK on remote to select your language of choice. English,
French, Spanish, Italian, German, Dutch, Polish, Russian and Simplified Chinese
are available.
Local Radio
The radio is set by default to detect the radio stations in your local area
automatically through internet connection and these stations can be accessed by a
press of [LOCAL] button on remote. You can also set Local in another region if you
want. Highlight the Local Radio and press [NAVIGATE/ENTER] or OK on remote.
Choose Manual-set Local radio to change the region setting.
Playback Setup
This is to set the mode of playback under UPnP/DLNA compatible streaming:
Repeat All, Repeat Once or Shuffle.
Resume Play Options
• Resume once ready
This is set by default. The radio will resume playing the last played station when it
is power on the next time.
• Stay at home
Choose this option if you want the radio to stay on the Home screen without
playing anything when it is power on the next time.
Power-On Options
This is to select the state of the radio after a power reset or power cut, whether to
return to the Standby mode or ready to use.
Dimmer
You can set the backlight level for the display as you prefer. There are two settings:
Mode and Level
• Mode - Normal or Power Saving
Normal - the display will stay with the same level of brightness all the time without
dim down.
Dim - the display will dim down after 20 seconds if no operation is made on the
radio.
• Level - Bright and Dim
Bright - This is to adjust the level of brightness in Normal mode.
To Next Page
Loading...
