Oceanic Pro Plus 2 - To Set - Time

31
ATR
O
2
N
2
ATR
O
2
N
2
TO SET - TIME (while in the Surface Mode)
Set for factory local time, the Time can be set to values be-
tween 1:00 and 12:59 (AM/PM) or 0:00 and 23:59.
 Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
 Press and release the Left (Advance) button, the Units
screen appears with the set point flashing.
 Press the Left (Advance) button 2 more times.
 Time appears with the Hour value flashing (Fig. 26).
 Press and hold the Right (Select) button to scroll through
the Hour values in increments of one hour.
 Press the Left (Advance) button to accept the setting.
 The Minute value flashes (Fig. 27).
 Press and hold the Right (Select) button to scroll through
the Minute values in increments of one minute.
 Press the Left (Advance) button to accept the setting and
advance to Set Year.
Fig. 26 - Set Hour
Fig. 27 - Set Minute