EasyManua.ls Logo

Oceanic VT Pro - Power Supply and Battery

Oceanic VT Pro
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
During the following situations, the 10 second continuous tone will be followed by a
5 second steady beep that will not turn off when acknowledged -
• Ascending above a required Decompression Ceiling Stop Depth for more than 5 minutes
(referred to as a Delayed Violation).
• Decompression requires a Ceiling Stop Depth of 70 feet/21 meters or deeper.
• Being on the Surface for 5 minutes after a Conditional Violation (Permanent Violation).
SMARTGLO
®
BACKLIGHT
To activate the Backlight - press the Side (Select) button.
• The Smart Glo
®
feature senses the intensity of natural light present. If a low level of light
is present, the Backlight will activate and illuminate the display for button depression
time plus the user set Duration time of 0, 3, or 7 seconds.
• Press the button again to activate as desired.
NOTE: Extensive use of the Backlight reduces estimated Battery life. Also,
the Backlight does not operate during a Low Battery Condition or when down-
loading data to a PC.
POWER SUPPLY
The Transmitter utilizes 1 - 3 volt, CR2 Lithium Battery and the Display Module utilizes 1 - 3
volt CR2450 Lithium Battery. They should provide from 50 dive hours of operation, if you
conduct 1 - one hour dive each time the unit is activated, to over 150 dive hours of opera-
tion, if you conduct 3 or more one dives each time the unit is activated.

Related product manuals