32
ATR
O
2
Setting Hour Format (continued) -
• Press and release the Side (Select) button to toggle between
12 and 24.
• Press the Front (Advance) button to accept the setting and
advance to Set Hour, or press and hold Both buttons for 2
seconds to revert to Surface Mode.
TO SET - TIME (while in the Surface Mode)
Set for factory local time, the Time can be set to values between
1:00 and 12:59 (AM/PM) or 0:00 and 23:59.
• Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
• Press and release the Front (Advance) button, the Units screen
appears with the set point flashing.
• Press the Front (Advance) button 2 more times.
• Time appears with the Hour value flashing (Fig. 30).
• Press and hold the Side (Select) button to scroll through the
Hour values in increments of one hour.
• Press the Front (Advance) button to accept the setting.
• The Minute value flashes (Fig. 31).
• Press and hold the Side (Select) button to scroll through the
Minute values in increments of one minute.
• Press the Front (Advance) button to accept the setting and
advance to Set Year.
Fig. 31 - Set Minute
Fig. 30 - Set Hour
ATR
O
2
To Next Page
Loading...
