Oceanic VT Pro - Set Date

33
TO SET - DATE (after setting Time)
Factory set for the factory local Date, the Date can be set to
values between 01/01/02 and 12/31/20.
When set for Metric Units of Measure, Month appears to the
right of Day.
• After having set and accepted the Time, the Date appears
with the graphic dAY, and Year value flashing (Fig. 32).
• Press and hold the Side (Select) button to scroll through the
Year values in increments of one Year.
• Press the Front (Advance) button to accept the setting.
• The Month value flashes (Fig. 33).
• Press and release the Side (Select) button to scroll through the
Month values in increments of one month.
• Press the Front (Advance) button to accept the setting.
• The Day value flashes (Fig. 34).
• Press and hold the Side (Select) button to scroll through the
Day values in increments of one day.
• Press the Front (Advance) button to accept the setting and
advance to Set Audible Alarm, or press and hold Both buttons
for 2 seconds to revert to Surface Mode.
Fig. 34 - Set Day
Fig. 32 - Set Year
Fig. 33 - Set Month
ATR
O
2
ATR
O
2
ATR
O
2