Octave HP 700 User Manual

OPTIONS
Option: Additional line-level input module
23
5. Secure the module to the front side of the HP 700 first using screws from the front panel.
6. Carefully screw in all the screws to the terminal screw strip. Do not tighten them too much.
7. Insert the flat connectors of the supplied ribbon cable in the designated slot on the adapter board
on the HP 700 (slots 1 and 2 are equivalent). The blade terminal cannot be twisted, since it can
only be inserted in one position.
The input module ribbon cable plugs only fit in the two outer slots with 4 pins. (The other slots
are reserved for connecting the phono board.)
8. Close the cover on the HP 700 and tighten the screws.
11.1.2. Available line-level input modules
See inlay manual “In- and Output Modules”
Effective 2017: IN4: RCA and XLR switchable
IN8: XLR with transformer
IN9: RCA with transformer

Octave HP 700 Specifications

General

Brand	Octave
Model	HP 700
Category	Amplifier
Language	English