4. handlebar mounting
Now remove the scooter from the
packaging. Lift the handlebar with both
hands, fold the handlebar upwards until
it locks into place and set up the stand.
Press the power button to check that
the scooter is working properly.
Now take 5 of the screws and tighten
them at the top of the handlebar.
Take 2 more screws to
the locking lever (longer side
pointing upwards).
5. fork assembly
Align the handlebars so that the
handlebars are in line with the front tire.
Fold the handlebar down and hook the
locking lever onto the locking hook
(please also ensure that the handlebar
and front tire are in a straight line when
folding).
Tighten the fitted screws on both sides
of the folding mechanism using an M4
Allen key.
Your scooter is now ready to go!
To Next Page
Loading...