1. open the packaging
Open the packaging and remove the
operating instructions, charger and other
accessories.
Please follow the individual assembly steps and do not
remove the complete scooter from the packaging.
2. preparation for handlebar
mounting
Lift the handlebar and insert
the handlebar into the
handlebar stem.
3. preparation for fork assembly
Now remove the front wheel
from the packaging.
Insert the front wheel into the
handlebar tube at the bottom .
Take the M5 Allen key and
tighten the through bolt until the
bolt head is flush. Then tighten
the screw a further 3 turns.
Scan the QR code to call up the
video showing the individual
assembly steps.
To Next Page
Loading...