EasyManua.ls Logo

Odys NEO e100 - Operating Instructions

Odys NEO e100
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Operating instructions
Read the operating instructions carefully before using the appliance
to ensure safe and proper use.
Do not drop the device and do not knock it hard.
Do not expose the device to extreme heat or cold. Do not expose
the device to direct sunlight for long periods.
Protect the device from strong magnetic fields.
Protect the device from water and moisture. If water or liquid
penetrates the device, switch it off immediately and clean it.
Do not clean the appliance with chemicals to protect it from
corrosion. Only use a damp cloth or a toothbrush.
We accept no responsibility for damage caused by improper use,
modification of the device or replacement of the battery.
Do not open, repair or modify the device. Doing so will invalidate
your warranty.
If the device is not used for a longer period of time, charge it once
a month.
Charge the battery if:
i. The battery is displayed as exhausted;
ii. the appliance switches off automatically;
iii. the device does not respond when the power button is
pressed.
Observe the instructions and safety information on the device
before putting it into operation.
To avoid fire and electric shock, do not expose the appliance to
rain or moisture. Protect the appliance from splashing water and
dripping water.
There is a risk of explosion if the battery is incorrectly replaced.
Replace only with a battery of the same type.
Do not expose the battery to direct sunlight or fire.
Always dispose of rechargeable batteries and batteries in an
environmentally friendly manner.
After disconnecting the mains adapter, the device remains ready
for operation as long as the battery is sufficiently charged.
The power supply unit is a CLASS II device and is double
insulated, therefore no earthing is required.