EN
35
Wifi – Solving Connection Problems
1. Enter the Wifi-Settings.
2. Select your wifi and delete it.
3. Place a hook at „Show Password“ .
4. Check and enter the password.
5. Take care at the status messages below the network name:
Problem
Status message
(Below the network
name under wifi
settings)
Probably Reason Solution
Network
can not
be found
Network can not be
found
- SSID invisible
- Wifi signal too
weak
- Enable visibility of the
SSID at the router
settings
- decrease the distance
to your router
No
Internet
-> Connecting
-> Not connected
- MAC filter active
- deactivate the filter at
the router settings
No
Internet
-> Connecting
-> Authorization
-> Not connected
- Wrong or wrong
written password
- check password and
enter again
No
Internet
-> Connecting
-> Authorization
-> receiving IP-
address
-> Not connected
- Wrong router
configuration
- Wifi signal too
weak
- DHCP Server off
- Delete the list of
connected engines at
the router settings
- decrease the distance
to your router
- Enable DHCP at the
router settings