Odys Shark - Basic Functions and Audio Modes; Muting and Unmuting Audio; Volume and Tone Adjustment; EQ Effects Selection

EN
ODYS Shark
- 10 -
9 Basic Function
9.1 MUTE THE UNIT
During playback, press the MUTE button on the remote to switch off the
audio. Press the button again to resume the audio.
9.2 VOLUME LEVEL/TREBLE/BASS ADJUSTMENT
Press the VOLUME +/- buttons or TREBLE +/- buttons or BASS +/- buttons
on the remote to adjust the volume output level or treble effect or bass effect.
9.3 EQ EFFECTS
During playback, press EQ button on the remote repeatedly to cycle through
the EQ options; when your desired EQ effect shows on the screen, release
the button.
9.4 PROFESSIONAL AUDIO MODES
During playback, press the VOICE, MUSIC or MOVIE buttons on the remote
to switch among voice, music and movie audio modes for getting high sound
quality. The audio modes can reveal the characters and details of the sound
of the voice, music and movie and make you liked being there.
10 FM RADIO
10.1 TUNING THE FM RADIO
1. Power on the unit, switch to FM (RADIO) mode by pressing MODE button
repeatedly.
2. Press the TUNING/SKIP/SEARCH buttons on the remote to fine tune radio
station. Press and hold the TUNING/SKIP/SEARCH buttons on the remote
to auto search radio station forward or backward respectively (When an
available station will be found, the unit will broadcast it immediately and the
searching will be stopped). During auto searching, press the
TUNING/SKIP/SEARCH buttons on the remote to stop the searching.
3. At radio mode, it is possible to access the frequency via numeric buttons on
the remote control. For example, press buttons 8, 9 and 8 to get to 89.8
MHz.