Odys Slim X6 - Driver and PC Connection Settings; Protecting Photos from Deletion

ODYS Slim X6
27
EN
5.10 Setting the driver
The default driver setting is MASS.
a) If there is no USB connection to the computer
1
Press the button to activate the configuration menu.
2
Select the “Driver Type” item in the menu and press OK to
confirm.
3
Press or to select the required driver type and press OK
to confirm.
b) Camera connected to a computer by USB (in PC MASS mode or
TWAIN mode):
1
Press the menu button to activate the menu for selecting a
driver.
2
Press or to select the required driver type and press OK
to confirm.
5.11 Protecting photos against accidental
deletion
This camera offers a protect function to prevent selected images being
accidentally deleted.
1
Press the button to start the playback mode. Open the
photo to be protected. Press the menu button and select the
“Protect” item.