Odys Z8 - Exposure compensation; Selecting an EV value

23
ODYS SLIM Z8
EN
5.5 Exposure compensation
By correcting the exposure value (EV), you can adjust images which appear too light or
too dark.
1
Selecting the image mode
Press the menu button in photography mode.
2
Selecting EV
Select the EV item in the menu and press OK to open the exposure option.
3
Selecting an EV value
Press
or to select a suitable exposure compensation and press OK to
confirm. The value can be set in eight steps between -2.0 EV and +2.0 EV.
Exposure compensation can be very useful. In dark conditions or in backlighting
conditions set the value to a positive number and in bright conditions to a
negative value.
Do not use exposure compensation if the subject is in a very bright or very dark
area, or if the flash is used.
5.6 Selecting a language
When you use the camera for the first time, the texts on the LCD may not be displayed in
your language. However, the LCD language can be changed easily.
1
Press the button to open the configuration menu.
2
Select the “Language” menu item and press OK to confirm.
3
Select the required language.