EasyManua.ls Logo

OERTLI AD194 - Choose the position; Installation location guidelines; Attachment; Mounting the remote control unit

OERTLI AD194
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
AD194 27/03/07 - 88014542D
1 Choose the position
The remote control will be installed against an internal partition, about
1.5 m from the floor in a judiciously choosen "reference" room.
Positions to be avoided
Enclosed, exposed to solar radiation, heated by a flue duct, exposed
to cold or hot air currents from air ducts, close to an open fireplace, a
heat source (television), behind a curtain.
2 Attachment
Carefully release the lugs on the front panel from the
ribs in the box using a screwdriver.
Remove the cover.
Drill 2 holes with a Ø of 6 mm. Put the rawplugs in place. Secure
the box using the 2 screws provided.

#
8800N036B
8801N338
MODE
1
MODE
Ø 6mm
2
2
3
8801N339

Related product manuals