Why won't my OHAUS FD Scales turn on?
If your OHAUS scale will not turn on, ensure that the AC power is connected properly. Also, the battery may be discharged. Connect the scale to a power source to charge the battery.
What does CAL E mean on my OHAUS FD Scales, and how do I fix it?
If your OHAUS scale displays 'CAL E' (Calibration error), it indicates that incorrect calibration weights were used. To resolve this, calibrate the scale using the correct calibration weights.
How to unlock calibration on OHAUS FD?
If you cannot calibrate your OHAUS scale, the calibration might be locked. Set LFT to OFF in the Menu Mode, set LCAL to OFF in the Menu Mode, and ensure the Security switch is in the Off position.
What to do if my OHAUS FD Scales display Err 1 (Overload)?
If your OHAUS scale displays 'Err 1 (Overload)', it means the load on the scale exceeds its capacity. To resolve this, reduce the weight on the scale.
Why are my OHAUS FD not displaying weight accurately?
If your OHAUS scale is not displaying weight accurately, the scale may need calibration. Calibrate the scale to ensure accurate readings.
How to fix unstable weight readings on OHAUS Scales?
If the weight reading on your OHAUS scale is unstable, it could be due to an unstable environment or interference under the pan. First, ensure the scale is placed in a stable environment. Second, make sure the weighing pan is unobstructed and free to move. You may also need to change the Averaging Level setting.
Why is the battery indicator low on my OHAUS FD?
If the battery indicator on your OHAUS scale is low, it means the battery is discharged. Connect the scale to a power source to charge the battery.
What does Err 2 (Underload) mean on OHAUS Scales?
If your OHAUS scale shows 'Err 2 (Underload)', it indicates that the pan is missing. Install the pan and then press the zero button.
What does Err 14 (Zero error) mean on OHAUS FD Scales?
If your OHAUS scale displays 'Err 14 (Zero error)', it means the zero limit was exceeded during power up. Remove any load from the pan to resolve this issue.
Why does the battery on my OHAUS FD fail to charge fully?
If the battery in your OHAUS scale fails to charge fully, it is likely defective. Have the battery replaced by an authorized Ohaus service dealer.
To Next Page
General