Need help?Do you have a question about the OHAUS Pioneer PX2202/E and is the answer not in the manual?
General| Capacity | 2200 g |
|---|---|
| Readability | 0.01 g |
| Display | LCD |
| Linearity | ±0.02 g |
| Repeatability (Std. Dev.) | 0.01 g |
| Housing Material | ABS Plastic |
| Interface | RS232 |
| Power Supply | AC Adapter |
| Calibration | External |
| Operating Temperature Range | 10°C – 40°C |
| Units of Measurement | g, kg, oz, lb |
Outlines essential safety warnings and precautions for installation and operation.
Describes the procedure to ensure the balance is level for accurate measurements using the built-in level bubble.
Explains how to connect power and the recommended acclimation time for the balance.
Emphasizes the need for initial calibration and differentiates between InCal and ExCal models.
Details the steps for performing basic weighing operations to determine object weight.
Guides on using the balance for counting items with uniform weight.
Explains how to use the balance to display weight as a percentage of a reference sample.
Describes how to weigh unstable loads by averaging readings over a set time.
Introduces the density determination application and related equipment.
Provides detailed steps for measuring the density of a sinking solid using water as the auxiliary liquid.
Explains the process for determining the density of a floating solid using water.
Details how to measure the density of a solid using an auxiliary liquid other than water.
Introduces the available calibration methods: Internal, Span, and Linearity.
Details the calibration sub-menu specific to InCal models, excluding ExCal.
Describes the process of internal calibration for InCal models, performed with internal masses.
Outlines the steps for performing span calibration using zero and full load points.
Details the process for linearity calibration using three calibration points.
Covers settings, calibration, and security switch for Legal for Trade compliance.
Outlines the verification process performed by authorized agents for LFT compliance.
Advises on periodically verifying calibration using accurate weights and referring to calibration sections.
Lists common symptoms, possible causes, and remedies for balance operational problems.
To Next Page
