Need help?Do you have a question about the OHAUS PA1502 and is the answer not in the manual?
General| Capacity | 1500 g |
|---|---|
| Readability | 0.01 g |
| Calibration | External |
| Display | LCD |
| Linearity | ±0.02 g |
| Repeatability | ±0.01 g |
| Interface | RS232 |
| Power Supply | AC Adapter |
| Stabilization Time | 2 seconds |
| Weighing Units | g, oz, ozt, dwt, ct, gn |
| Operating Temperature | 10°C to 40°C |
Overview of the Ohaus Pioneer balances and manual contents.
Essential environmental and workspace conditions for servicing balances.
Lists special and standard tools required for balance maintenance.
Detailed technical specifications for various Pioneer balance models.
Explains basic balance operation, controls, and load cell mechanics.
Details on connecting the balance to external devices via RS232.
List and function of commands for balance communication via RS232.
Standard methodology and initial checks for balance issues.
A guide to help locate probable causes and remedies for balance symptoms.
Explains common error codes displayed by the balance and their solutions.
Precautionary steps and checklist for routine balance maintenance.
Step-by-step instructions on how to safely open different Pioneer balance models.
Detailed procedures for removing, disassembling, and servicing load cells.
Procedure for replacing the main PCB when other remedies fail.
Steps for disassembling the load cell assembly of analytical models.
Procedure for replacing a block style load cell using a kit.
Procedure for adjusting the Up/Down Stop Screw on block style load cells.
Conditions and preparation needed before performing balance tests.
Procedure for basic operational checks and segment display verification.
Series of tests to determine balance accuracy and performance against specifications.
Exploded view and parts list for precision round pan balances.
Exploded view and parts list for precision round pan InCal balances.
Exploded view and parts list for precision square pan InCal balances.
Exploded view and parts list for precision draft shield balances.
Exploded view and parts list for analytical balances.
Exploded view and parts list for precision load cells, including InCal.
Exploded view and parts list for analytical load cells, including InCal.
Exploded view and parts list for block style load cell assemblies.
Description of Span and Linearity calibration types for Pioneer balances.
Procedure for setting the balance's zero and maximum weighing range.
Procedure for minimizing weight deviation across the balance's range.
Steps to access the service menu for advanced calibration.
Procedure to check the A to D circuit's performance.
Advanced span calibration using the service menu.
Procedure for three-point linearization calibration.
Procedure for five-point linearization calibration.
To Next Page
