Need help?Do you have a question about the OHAUS Pioneer PX3202/E and is the answer not in the manual?
General| Capacity | 3200 g |
|---|---|
| Readability | 0.01 g |
| Display | LCD |
| Linearity | ±0.02 g |
| Repeatability (Std. Dev.) | 0.01 g |
| Calibration | External Calibration |
| Interface | RS232 |
| Power Supply | AC adapter / Battery |
| Operating Temperature Range | 10°C to 40°C |
| Units of Measurement | g, oz |
Explains the meaning of signal words and warning symbols for safety.
Details critical safety instructions for installation and operation of the balance.
Instructions for carefully unpacking the balance and verifying components.
Guidance on choosing a suitable environment to avoid interference.
Procedure for ensuring the balance is level using adjustable feet.
Steps for connecting power and allowing the balance to adjust to ambient conditions.
Instructions for connecting the balance to computers or printers via RS232 or USB.
Explanation of the necessity and methods for initial balance calibration.
Explanation of core functions like weighing, taring, and zeroing.
Step-by-step guide for performing standard weight measurements.
Overview of the density determination application and its requirements.
Detailed steps for measuring the density of sinking solids using water.
Procedure for measuring liquid density using a calibrated sinker.
Guide to understanding menu structure and navigation.
Step-by-step instructions on how to modify balance settings.
Details on available calibration types: Internal, Span, and Linearity.
Specific calibration options available for InCal models.
Instructions for performing internal calibration on InCal models.
Detailed procedure for performing span calibration.
Detailed procedure for performing linearity calibration.
Setting the balance for legal for trade applications.
Restoring all balance settings to their factory defaults.
Configuration and verification steps for trade-approved use.
Information regarding the official verification process for trade use.
Guide for setting up RS232 connection for printing or data transfer.
Guidance on verifying balance calibration regularly.
A table listing common symptoms, causes, and remedies.
Details on environmental conditions and operating parameters.
List of commands used for controlling the balance via RS232.
Important notice regarding EU regulations for verified weighing instruments.
To Next Page
