To Next Page
B
Brittany GeorgeAug 17, 2025
What does Err 9.5 mean on OHAUS Laboratory Equipment?
- JJessica JacksonAug 17, 2025
If your OHAUS Laboratory Equipment is displaying 'Err 9.5', the loadcell may not be working correctly.
What does Err 9.5 mean on OHAUS Laboratory Equipment?
If your OHAUS Laboratory Equipment is displaying 'Err 9.5', the loadcell may not be working correctly.
What does Err 53 mean on OHAUS Laboratory Equipment?
If your OHAUS Laboratory Equipment shows 'Err 53', it means there is an issue with the EEPROM.
Why does my OHAUS Laboratory Equipment show '--NO--' when taring?
The '--NO--' error on your OHAUS Laboratory Equipment indicates that the tare is out of range.
Why does my OHAUS Laboratory Equipment show '--NO--' when zeroing?
The '--NO--' error on your OHAUS Laboratory Equipment indicates that the zero is out of range.
What does 'LoW.rEF' mean on OHAUS Laboratory Equipment?
The 'LoW.rEF' error on your OHAUS Laboratory Equipment means that the reference weight is low, and this only applies in counting mode.
What does Err 8.1 mean on OHAUS Laboratory Equipment?
The 'Err 8.1' error on your OHAUS Laboratory Equipment indicates an over init zero range.
What does Err 8.2 mean on OHAUS Laboratory Equipment?
The 'Err 8.2' error on your OHAUS Laboratory Equipment indicates an under init zero range.
What does IDnr.Err mean on OHAUS Laboratory Equipment?
The 'IDnr.Err' error on your OHAUS Laboratory Equipment indicates an IDNR error.
What does PUSH.LFt mean on OHAUS Laboratory Equipment?
The 'PUSH.LFt' message on your OHAUS Laboratory Equipment indicates that you need to push the LFT button, specifically for PR.
What does 'No CAL' mean on OHAUS Laboratory Equipment?
The 'No CAL' error on your OHAUS Laboratory Equipment indicates a production calibration failure.
Explanation of signal words and warning symbols used in the manual.
Essential safety warnings and precautions for operating the balance.
Instructions for performing basic weighing operations.
Guide to using the parts counting application for uniform items.
How to use the percent weighing application for reference samples.
Overview of the balance's calibration methods.
Guide to customizing balance settings and functionality.
Steps required before verification and sealing for trade use.
The procedure for official verification by weights and measures authorities.
Instructions for sealing the balance to prevent tampering.
Solutions for common balance symptoms and error messages.
Details of the product's warranty terms, conditions, and coverage.
General
