Need help?Do you have a question about the OHAUS PR Series and is the answer not in the manual?
General| Calibration | External Calibration |
|---|---|
| Display | LCD |
| Power | AC Adapter (Included) |
| Units of Measurement | Gram; Kilogram; Ounce |
| Housing Material | ABS |
| Operating Temperature | 10°C – 40°C, 80%RH, non-condensing |
| Interface | RS232 (Available on some models) |
| Platform Size | 90mm to 150mm depending on model |
Basic overview of the PR Series balances and their capacity range.
Key operational features of the balance, including display and applications.
Explanation of hazard signals and their meanings for safety.
Essential safety warnings for installation and operation.
Procedures for safely unpacking the balance and its components.
Guidelines for choosing an optimal installation site.
Instructions on how to properly level the balance for accurate readings.
Steps for connecting power and allowing the balance to acclimate.
Guide to connecting external devices via RS232 port.
Importance and types of calibration for accurate weighing.
Description of the balance's display, buttons, and functions.
Explanation of core operations like weighing, taring, and zeroing.
Identification of components for models with draft shields.
Identification of components for models without draft shields.
Step-by-step guide for performing basic weighing operations.
Instructions on how to use the parts counting application.
Guide to determining weight as a percentage of a reference sample.
Details on using the 'Weigh Below' feature.
How to access and navigate through the balance's menu system.
Steps to modify various menu settings.
Overview of the three available calibration methods.
Specifics for InCal models' calibration options.
Procedure for performing internal calibration on InCal models.
Method for fine-tuning calibration results.
Steps to perform span calibration using reference weights.
Procedure for linearity calibration.
Customizing balance parameters for optimal functionality.
Adjusting the signal filtering level for stability.
Configuring the automatic zero tracking feature.
Setting up the automatic tare function.
Configuring the displayed readability of the balance.
Setting the preferred date display format.
How to set the current date on the balance.
Setting the preferred time display format.
How to set the current time on the balance.
Adjusting the display's brightness level.
Enabling or disabling the automatic display dimming feature.
Setting the Legal for Trade status of the balance.
Activating and selecting desired units of measure.
Customizing RS232 communication settings.
Configuring the data transmission speed.
Setting data bits, parity, and stop bits.
Configuring the flow control method.
Customizing data transfer and printout settings.
Printing only when the reading is stable.
Printing only numeric data values.
Printing headers once per day.
Enabling or disabling automatic printing.
Option to include headers in printouts.
Option to include date and time in printouts.
Option to include the balance ID in printouts.
Option to include the balance name in printouts.
Option to include the user name in printouts.
Option to include the project name in printouts.
Option to include the application name in printouts.
Option to include the weighing result in printouts.
Option to include the gross weight in printouts.
Option to include the net weight in printouts.
Option to include the tare weight in printouts.
Option to include a signature line in printouts.
Adjusting paper feed after printing.
Setting up Good Laboratory Practices parameters.
Configuring GLP header text.
Setting the GLP balance name.
Setting the GLP user name.
Setting the GLP project name.
Resetting all settings to factory defaults.
Locking or unlocking specific menu items.
Steps required before verification and sealing.
The procedure performed by officials for verification.
Instructions for sealing the balance to prevent tampering.
Setting up the connection for printing to a computer or printer.
Description of the data output format for results.
Examples of printouts for different applications.
Verifying and performing calibration as needed.
Procedures for safely cleaning the balance.
Table of common symptoms, causes, and remedies.
How to contact Ohaus service for support.
Detailed technical specifications including ambient conditions and materials.
Visual representations of the balance's physical dimensions.
List of available optional accessories for the balance.
Overview of communication capabilities.
List of commands for controlling the balance via interface.
Diagram and description of RS232 pinout.
To Next Page
